Ethernet switches are easy to maintain, but you can still experience some network problems. Here are some of the most common problems. I will give a few tips to solve these problems.
You must also have interface cards to network (or NICs) in any computer, printer, or any other device that you want to be on the network. This can be your standard 10/100 Ethernet card or 802.11b / g, which can be used for a wireless network. When you are building a wired network, you can use the Ethernet devices with 10 MB or 100 MB speeds. They are both so cheap that there is really no reason not to go for the 100 MB equipment. These devices generally support devices that also operate in the old standard. There are also Gigabit Ethernet, but that is too expensive for many to build a home network.
192.168.1.1 is a private IP address used by router manufacturers such as Belkin, SMC and also by other manufacturers, you can find them on 192168-1-1.mobi. As with any IP address, this private address can only be used once in a network. This means that no devices connected to a particular network have this address. It can be used repeatedly, so it can be connected to completely different networks with routers assigned.
If your computer has more than one connection, select Let me choose the connections with the network, click Next, and select the connection that you want to configure (it is the connection between your PC), and then exit wizard (When prompted) and computer names and the name of your workgroup – MSHOME default) – this is the same on both computers. When finished, right-click on the connection and select Properties -> Select Internet Protocol (TCP / IP) and click “Properties” -> make sure to obtain an IP address automatically and the address Of the DNS server are automatically selected.
On the main PC, open the Control Panel -> double-click Network Connections -> right-click the network connection (the one to which the two computers are connected) and select Properties -> Select TCP / Key Click the following IP address and IP address 192.168.0.1 Subnet Mask: 255.255.255.0, leave the field blank by default Select the DNS server address, but leave it blank.
Because your wireless network is now invisible, you must configure your computer to connect your wireless network to the new name. In Windows XP, click the wireless icon in the notification area and go from there.
To verify that the router is working, connect a computer directly (do not try to use the wireless for this step). Enter 192.168.0.1 and 192.168.1.1 in your Internet browser. If a field for a username and password appears in, the router is probably not fried.
The login screen of the router will open and ask for a username and password. Type the credentials and press Enter to access the configuration page. If you have never changed these credentials, you must be aware of the information provided with the router’s documents. Check your manual, etc. To discover them. If you changed the username and password, enter the new one.
Enable MAC address filtering. It is to be activated as a further security layer. If you use it with wireless encryption, the security of your home network will be brought to a completely new level.
Log in to your router (in the same way as above) and navigate to the configuration page. Select the Applications and Games tab. Click the port area forward. Enter all information in the appropriate fields, select TCP or UDP under the Protocol tab. When finished, review the information and click the Save Settings button. Leave the router interface and enjoy access to applications that have been blocked by the firewall.